Evido EAD-D2000 Instrukcja Obsługi Pobierz pdf (Strona 61)

If you have finished the setting above, click the Apply button to save and apply the setting. To

manually start or stop the recording, click the START and STOP button for Instant recording.

This button activates instant recording without depending on the recording setting rules.

To record VCA event data only, unselect Enable automatic recording shortly after mounting

storage device, and then select Enable automatic recording with VCA event triggering. In this

case, you do not need to set the segmentation rule. All of configuration is the same as manual

recording but optionally, you need to set up ‘Event Recording’ tab.

Step 1. Set the time of post-alarm recording. Then, when VCA event is triggered, the images

will be recorded for the configured time only.

Step 2. Check the box of ‘Enable automatic recording with VCA event triggering’ to enable the

VCA event recording. If the desired stream source is selected from Primary/Secondary

recording setting section, the VCA event data will be automatically recorded upon the event

triggering. Go to Step 6 or Option on Steps for manual recording for more details about

selecting the stream source.

Step 3. Click the Apply button to save the changes.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 95 96

Brak uwag

Evido EAD-D2000 Instrukcja Obsługi Strona 61