Evido EAD-B1000 Instrukcja Użytkownika Pobierz pdf (Strona 89)

TelVue HyperCaster

User Manual / v4.3 / July 2014

HyperCaster

is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com

• Description – Enter a longer description about the switch that will distinguish it from the

others at your installation.

• Enable Breakaway? – To enable breakaway, check this box. Enabling breakaway allows

separate audio and video input ports to be routed to the same switch output port.

• Switch Outputs – The names and brief descriptions of the available switch output ports are

listed. To change any of them, type the new name and brief description in the fields for that

output port.

• Video Switch Inputs – The names and brief descriptions of the available video switch input

ports are listed. To change any of them, type the new name and brief description in the fields

for that input port.

• Audio Switch Inputs – The names and brief descriptions of the available audio switch input

ports are listed. To change any of them, type the new name and brief description in the fields

for that input port.

When you have finished entering the configuration information for this switch, click the Save button at

the bottom of the screen. To return to the Config page without making any changes, click the Cancel

button.

Configure RS232 Settings

To change the RS232 settings for the switch, click on the RS232 option. The application displays the

Edit Switch RS232 Settings screen.

The following fields are editable.

• COM Port – Enter the COM port number this switch will use.

• Baud Rate – Select the baud rate for this switch from the drop-down list.

When you have finished entering the configuration information for the RS232 switch, click the Save

button at the bottom of the screen. To return to the Config page without making any changes, click

the Cancel button.

Change Switch Configuration

The switch configuration option lets you control whether the HyperCaster will acknowledge or ignore a

manual switch (a switch using the buttons on the switch faceplate). To change the switch

configuration click on the configuration option.

To enable the HyperCaster to acknowledge a manual (faceplate) switch, select On from the drop-down

list. When the server detects a manual switch, it will ignore programmed switch events until the

operator returns the switch to its home path manually.

To prevent the HyperCaster from acknowledging a manual (faceplate) switch, select Off from the

drop-down list. The server will then ignore manual (faceplate) switches.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 102 103

Brak uwag

Evido EAD-B1000 Instrukcja Użytkownika Strona 89